Pressure Fit Designs
I've wanted to try some pressure fit acrylic designs for a while now. I drew up a variety of leaf designs and bought two different colors of acrylic to give…
Cabochon Board and Stone Setting
I've been making a lot of earrings lately, and so I decided I wanted to try my hand at setting some stones in the engraved areas of my designs. This…
Fine-tuning the Resin Flood
This post touches on some improvements to my resin fill method. I also test a second type of resin fill where I just fill/flood and engrave. Let's start there. For…
Resin Flood Coasters
Here is the second installment of my resin and lasercut experiments. This post will explore a few different ways of adding resin to the lasercut designs themselves. At the end…
Thick Acrylic on the Glowforge
I've been getting a little more comfortable with my Glowforge, but in this case I decided to go big or go home and try and push the limits of what…
- Go to the previous page
- 1
- …
- 7
- 8
- 9
- 10