Easy LED Lit Plaque
This is probably going to be a simple post, but hopefully it helps someone! I wanted to try my hand at LEDs, but didn't yet have a soldiering iron (I…
Mother of Pearl Inlay with the Glowforge
I'm still in that stage of Glowforge ownership where I'm jumping from material to material. I want to see what is possible and what isn't and find out which processes…
Glowforge Printed Shirt Designs
I was thinking about getting a Cricut in addition to my Glowforge (I'm one of those people who can NEVER have enough tools) until I came across a post that…
Monoline Text for Laser Cutting
If you've been working with text on your laser cutter, cnc, or vinyl plotter you've probably struggled with HOW to actually cut the text in the simplest, most effective way.…
Pressure Fit Designs
I've wanted to try some pressure fit acrylic designs for a while now. I drew up a variety of leaf designs and bought two different colors of acrylic to give…
Cabochon Board and Stone Setting
I've been making a lot of earrings lately, and so I decided I wanted to try my hand at setting some stones in the engraved areas of my designs. This…
Fine-tuning the Resin Flood
This post touches on some improvements to my resin fill method. I also test a second type of resin fill where I just fill/flood and engrave. Let's start there. For…
Resin Flood Coasters
Here is the second installment of my resin and lasercut experiments. This post will explore a few different ways of adding resin to the lasercut designs themselves. At the end…
Thick Acrylic on the Glowforge
I've been getting a little more comfortable with my Glowforge, but in this case I decided to go big or go home and try and push the limits of what…